Guide for using Mylar Paper to make your own Designs

INSTRUCTIONS FOR USING MYLAR SHEETS
TO Design your own Crystal Motifs DESIGNS
You can have fun making your own designs using Mylar/Motif paper.
Take your picture or patter and put it on a hard flat surface, I like using a wood cutting board or a table.
Tape down your picture or pattern with tape so it does not move
Remove the sticky part of the mylar paper and place it right on top of the pattern, be sure the sticky side of the mylar paper it up. Now tape the mylar paper done so it will not move.
Using either a Rhinestone pick it up or Tweezer pick up your Rhinestones and place them around the outline of your pattern or picture and soon you will began to see your design. Besure you are placing the shiny side of the rhinestone down. You should see the glue side up. Remember you will be ironing the design to your material using the glue side so it needs to be up wards towards you.
When you have the Rhinestones like you want just replace the white mylar paper and don't forget to take off the tape.
Sometimes when you place the white backing on you will move some of the rhinestones, don't worry just take the backing off again and replace any rhinestones that moved back in place.
Thats it your done and ready to iron on your design.
More information geing soon